CPU Temp Monitor/GPU Temperature Monitor – You don’t have to be a computer engineer to know how to check GPU and CPU temperatures of your computer. CPU stands for Central Processing Unit whereas GPU stands for Graphics Processing Unit. Constantly checking and maintaining temperatures of your CPU and GPU is crucial and especially when gaming for long hours because the machine is likely to overheat which can lead to hardware failure reducing the lifespan of the device.
Extra caution should be observed by laptop users of windows 10 by constantly checking the temperatures when using for long hours because overheating is said to be very common in such devices. Some of the known reasons for PC overheating are explained below.
Table Of Contents
- 1 Common Known Causes of CPU and GPU high temperatures
- 2 How to Effectively Monitor GPU and CPU Temperatures
- 2.1 BIOS
- 2.2 MSI AfterBurner
- 2.3 Guru3D RTSS (RivaTuner Statistics Server)
- 2.4 Open Hardware Monitor
- 2.5 AMD and Nvidia Control Panels to Monitor the Temperature of GPU’s
- 2.6 AMD and Intel Utility Programs for Checking the Temperatures of the CPU
- 2.7 Installed GPU and CPU monitors in Independent Graphic Cards.
- 3 Conclusion
Common Known Causes of CPU and GPU high temperatures
- Dust Buildup
Computers have a built-in system for cooling. It ensures constant airflow. However with time dust accumulates in the system. Laptops are known to collect dust more quickly than desktops even though eventually desktops will also accumulate dust.
- Poor Airflow
If the sides of the device are obstructed the PSU’s air intake is reduced hence interfering with the cooling system
- Defective Hardware
It could happen to the heating components or the CPU coolers. This can be rectified by replacing with new ones.
How to Effectively Monitor GPU and CPU Temperatures
BIOS stands for Basic Input/output System. It is accessible by simply restarting your PC. Once it begins to boot press the delete key about three times for effectiveness. For those who are not computer specialist the appearance on the screen may scare and worry you of making wrong changes on your computer. It’s normal to feel that way but be assured incase that happens there is an option to discard any wrong changes made knowingly or unknowingly when you get to exit the BIOS.
Once you get to the BIOS section the phrase CPU temp monitor appears. At this point you can monitor the temperatures.
Disadvantages of this method is, first of all takes time especially depending on your computer some take so long to restart. Secondly the computer normally heats up when under heavy load usage like playing video games and so one is forced to turn the computer off in between usage to monitor temperatures.
MSI AfterBurmer is a utility program for effectively monitoring temperatures in a CPU and GPU. The good news is that it is 100 percent free and highly customizable. It supports a majority of 64-bit applications and allows a wide range of languages. Immediate feedback on temperatures on your computer components can be accessed by simply installing or clicking on the program. Apart from monitoring using this program you can over-clock the system and modify speeds of your GPU and CPU fans to allow rapid cooling on your devices.
Guru3D RTSS (RivaTuner Statistics Server)
MSI Afterburner newest beta package download comes complete with RTSS (RivaTuner Statistics Server). MSI and Guru3D work together with both RTSS and Aferburner. Per minute accurate temperatures of your CPU and GPU are displayed on your screen by both RTSS and Afterburner.
One of the main primary reasons for a computer to overheat is action in First Person Shooter PC games being played. RTSS allows you to limit this action hence effectively reducing the danger of PC overheating.
Frame-rate during gaming can be limited through RTTS program by removing unwanted micro-stuttering brought about by frame-rate fluctuations. This gives you an improved gaming experience.
Open Hardware Monitor
This program is probably the simplest. Apparently it is absolutely free to download and use. Programs like RTTS and MSI Afterburner are kind of technical and hard to understand but Open Hardware Monitor is simple and fast to monitor your GPU and CPU temperature sensors. More still you can monitor clock speeds, voltages, fan speeds and load. However it is still in beta meaning it may not be flawless despite the fact that your CPU is supported.
It is compatible until Kaby Lake with all intel but doesn’t support Zen architectures of Coffee Lake. You can download OpenHardwareMoniter By clicking this link here.
AMD and Nvidia Control Panels to Monitor the Temperature of GPU’s
The AMD Control Centre and Nvidia Control Panel are owned by the AMD and Nvidia respectively for GPU temperature monitor. Using this control centers you are in a position to constantly monitor your GPU temperatures regularly without exiting or switching off your computer.
Both Nvidia and AMD Control Centre are installed using drivers disc or graphics card drivers. This two control centers can also be downloaded from either the Nvidia or AMD websites if they were not installed standard in the driver package.
Nvidia and AMD Control Panel’s are a bit more complex in monitoring GPU. Therefore if you are not very conversant with PC world, it’s advisable to first download tutorials on this process, to prevent harming your device or making mistakenly irreparable changes.
AMD and Intel Utility Programs for Checking the Temperatures of the CPU
AMD Ryzen Master and Intel Extreme Tuning Utility, both are utility programs designed and produced by AMD and Intel companies. They are designed for CPU temp monitor. These two programs are very easy to use and can be downloaded free of charge.
To function these programs, you need to be well informed to avoid damaging your hardware. These utilities are easy to use and allow extensive over-clocking options for your CPU and to monitor your PC temperatures.
Installed GPU and CPU monitors in Independent Graphic Cards.
Manufacturers of graphic cards do also include overclocking utilities which apparently function as temperature monitors. It’s also important to remember that most utilities are easily compatible using any GPU regardless it manufacturer.
The need to keep the Graphic Processing Unit and Central Processing Unit of our devices under consistent check from overheating is crucial. It is the number one reason why computers get damaged or crash. There more powerful and complex software’s that can be used such as CPU-Z or AID164 to keep monitoring your device regularly.
Toptenbiz Founder and an aspiring entrepreneur who keeps a close eye on open source, tech giants, and security. Get in touch with him by sending an email — firstname.lastname@example.org