Mac Charger Not Working? Here’s Top 4 Things You Can Do – There’s nothing like the shock and anxiety you experience when your laptop suddenly seizes to charge. You find yourself searching for the point of failure. Could it be your battery? Could it be your charger? Could it be your charging port? You then wonder if you can fix it yourself because taking it down to the Apple iStore could not only be expensive but time-consuming as well.
You just want to do your work or play around with your laptop. You even start reminiscing about all the times that your charger worked and how you took it for granted. Some of us even wonder if it’s karmic punishment for something we did not so long ago. But if you’re reading this article, it means you’ve snapped out of that type of thinking and you’re here looking for possible solutions. Well, as usual, we’re here to help.
The MagSafe power adapter is a neat little tool of engineering. It basically uses to the power of magnets to secure a connection between an AC power charger and a MacBook. It latches on securely and has a quick and clean release to prevent any mishaps. It usually works well enough but sometimes you may find yourself in a situation where the MagSafe is connected to your laptop but your laptop isn’t charging. This can be daunting but don’t worry about it we’re here to help. I hope you find at least one of these methods to be a solution to your problem.
MagSafe Won’t Charge a MacBook? Here Are Some Simple Fixes You Can Do
Ensure that The MagSafe is plugged into the right outlet
This seems like a no-brainer but sometimes the most obvious and simplest answers are the solutions that get ignored the most. So make sure that your charger is securely plugged into the right wall outlet and ensure that the switch is on. Try using a different wall outlet. This is important because it rules out the outlet being the problem. We all have a wall socket in our house that we consider to be the “problem outlet”, so ensuring that you have not connected your charger to the problem socket is important.
Additionally, check your distribution board. A short circuit or blown fuse may have tripped one of your switches. Just make sure there is power running to your wall outlets.
Check your charging ports for dirt and debris
When cleaning our laptops, what we often ignore are the ports. As a matter of fact, sometimes while we’re cleaning our laptops, fibre from the cloths we’re using get lodged in the laptop ports. Not to mention all the dust and fibres your laptop attracts while it sits in your backpack, purse, and bag. You need to ensure that you inspect both the adapter cord itself as well as the charging port. If you find anything stuck in your charging port, use a toothpick or something small and wooden to remove it. Try to refrain from using a metal object.
Reset the SMC To resolve “Mac charger not working”
If the previous two methods did not work for you, it probably means you have to go deeper. Your next option should be to try and reset the System Management Controller (SMC). Resetting the SMC may remedy a plethora of power related issues on your Mac such as a battery not charging, strange fan behaviour, the battery missing error or the MagSafe adapter not being identified as connected or passing a charge. How do you do it? It’s actually pretty simple. This method will work on your MacBook Air, MacBook Pro and Retina MacBook.
- Start by shutting down your MacBook by going to Apple menu > Shut Down
- Connect the MagSafe power adapter
- Hold down the Shift+Control+Option+Power in unison for roughly four seconds then release altogether.
- Ensure that the adapter is connected as you follow these steps. Once you’re done, press the Power button to boot your MacBook.
If you have a removable battery, shut down your MacBook, remove the battery for at least a minute, replace the battery and then boot your laptop up. For more information on this, you can follow Apple’s official instructions.
What does resetting the SMC do? It resets the power settings on the Mac, putting them back on the default power settings. If you have any customized settings, you’ll need set those up again.
Unplug, Wait, Plug and try Again
This tip may sound a little too obvious but unplugging everything seems to work to remedy most charging issues. Basically, you’ll disconnect everything, including the wall outlet, wait a bit and then try again. Here are more detailed instructions:
- Disconnect the MagSafe adapter from both the Mac and the power outlet.
- Let it sit unplugged from anything for about 5 minutes.
- Reconnect the charging plug to the wall outlet, then reconnect the MagSafe to the MacBook Pro.
It seems over simplistic but many users can attest to its efficacy.
Hopefully after trying one or more of these methods, your Mac should start charging fine. You might have to boot it before seeing if it is indeed charging properly. If mac charger not working, then you might have to replace the MagSafe charger. If that fails too, it might be a failure on the part of the logic board. If you’ve tried everything in this article, including replacing your MagSafe adapter, your next bet is to go down to your nearest Apple iStore or schedule an appointment or phone call with official Apple support. It could be a hardware fault although those are pretty rare. Either way, we hope you don’t have to resort to that.
Please tell us if you’ve found any of these methods to be helpful. Leave a comment in the comment section and tell us what worked for you. Maybe you have some tips of your own. Remember, sharing is caring. We hope you’ve found this article to be helpful. As always, thank you for reading.
Read More in Mac Os X: